Advertisement
ASSEMBLY INSTRUCTIONS
10
EB
A
Right side panel, inside view
B
Right side panel, outside view
CC3
C
Right side panel, inside view
CC1
-
+
CC2
CC1
Electronic Ignition Assembly
a. Remove the ignition battery cover
(CC2) and the plastic nut from the
electronic ignition box (CC1).
b. Position the electronic ignition
box (CC1) through the opening
in the right side panel (EB) and
secure using the nut.
CC2
c. Insert an "AA" battery into the battery
compartment, as shown. Secure using
the ignition button cover (CC2).
d. Insert the two Electrode set, main
burner (CD) wires into the Electronic
ignition assembly (CC1) as shown.
CD
NOTE: All main burner electrode wire
e. Insert the Instastart™ ignition button
(CC3) wires into the Electronic ignition
assembly (CC1), as shown in figure C.
12
connection points are the same
size.
Advertisement
