Accessories - Chamberlain Series 1200 Owner's Manual

1200 series
Hide thumbs Also See for Series 1200:
Table of Contents

Advertisement

Accessories Available For Your Opener
Outside Quick Release:
Model 1702
Required for a garage with NO
access door.
Model 59
Outside Keylock:
Opens the garage door
automatically from outside when
remote control is not handy.
Model 1708LM
8 foot Complete Rail:
To allow an 8 foot door to open fully.
Model 1710LM
10 foot Complete Rail:
To allow a 10 foot door to open fully.
Model 97LM
Extension Bracketsl:
(Optional) For safety sensor
installation onto the wall or floor.
Model 58LM
Multi-Function Door Control Panel:
Provides a Lock Feature which
prevents operation of garage door
LOC K
opener from portable remotes and
LIG HT
a Light Feature for constant light.
Model 976LM
SECURITY Keyless Entry:
Enables homeowner to operate garage door opener from outside by entering code on specially
designed keyboard. Also can add a temporary pass code for visitors or service persons. This
temporary code can be limited to a programmable number of hours or entries.
We recommend that you program your code
before you install the Keyless Entry. You will not
need assistance, and you can test the reception
at the mounting location before installation.
1. Choose a 4-digit code using numbers from 0 to 9
(a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the code, then press
and hold the Enter button. The indicator light on
the door opener panel will blink.
3. Press and release the "Smart" (learn) button on
the opener panel. After the opener light flashes,
release the Enter button.
Model 971LM
Model 972LM
Model 973LM
Model 974LM
Model 970LM
Model 98LM
To Add the Keyless Entry
Test by pressing the the code, then press Enter. The
door should begin to move.
You may also program the Keyless Entry from the
Multi-Function Door Control, as follows:
1. With the door closed, enter the four digit code
desired, then press and hold Enter.
2. Press and hold the light button on the door
control.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
38
SECURITY Single-Function
Remote Control:
Includes visor clip.
SECURITY 2-Channel
Remote Control:
Includes visor clip.
SECURITY 3-Channel
Remote Control:
Includes visor clip.
SECURITY 4-Channel
Remote Control:
Includes visor clip.
SECURITY 3-Channel Mini
Remote Control:
With key ring and Velco fastening
strip.
Passive Infrared Control console:
Multi-function door control with motion
sensor that automatically turns opener
lights on for 5 minutes when it detects a
person entering the garage. Sensor can
be easily deactivated when desired.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents