Attach Chain Spreader, Re-Install Chain - Chamberlain Series 1200 Owner's Manual

Assembly Step 2
Attach the Chain Spreader
and Re-install the Chain
For Models 1256R and 1246R only
• Line up the holes in the chain spreader with the
holes in the opener as shown. The slot in the chain
spreader must fit over the T-rail flange.
• Securely fasten the chain spreader with the
hardware provided.
• Remove the trolley threaded shaft from the trolley
by loosening the inner nut and lock washer.
• Guide the chain around the selected groove in the
chain spreader (to engage either the 8-tooth
sprocket or the 6-tooth sprocket) as shown.
• Continue dispensing the chain forward to the
trolley. Reconnect the trolley to the trolley threaded
shaft. Proceed to page 11 for chain tightening
instructions.
Serious injury can result if fingers become
entangled in moving opener sprocket. Attach
sprocket cover securely. Never operate opener
while your hand is near the opener sprocket.
USE ONLY
THIS TYPE
AND SIZE
SCREW
T-rail
Flange
Outer
Nut
Trolley
Chain
Spreader
Chain
Spreader
Chain
Spreader
Chain
10
WARNING
#8x1"
Hex Screw
Washers
Chain
Spreader
Slot
Trolley
Inner Nut
Threaded
and Washer
Shaft
T-rail
8-Tooth
Sprocket
Opener
Mounting Plate
6-Tooth
Sprocket
Opener
Mounting Plate
Install Chain
In This Direction
Opener
Sprocket