Daewoo Kalos User Manual page 175

Switching the RDS Funtion ON/OFF:
To use the RDS functions (AF and
REG), press the TRAF•RDS button
(11) for longer than two seconds.
If you activated the RDS function,
"RDS" lights up in the display.
Selecting the frequency range/memery
level
This unit can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM)
ranges.
There are three preset memory levels
for the FM frequency range (FM1, FM2
and FMT) and one for each of the MW
and LW ranges.
You can store six stations on each
memory level.
To switch between the memory levels
or frequency ranges,
briefly press BND•TS button (12) re-
peatedly until the required frequency
range / memory level is displayed.
Tuning into a station
There are various ways of tuning into
a station.
Automatic Seek Tuning:
Press the V or T button (5).
The unit tunes into the next receivable
station.
Tuning into Stations Manually:
You can also tune into stations manu-
ally.
Press the G or H button (5).
NOTE
You can only tune into stations
manually if the RDS function is de-
activated.
CLIMATE CONTROL AND AUDIO SYSTEM 4–67
Browsing Through Broadcasting Net-
works (only FM):
If a radio station provides several
programmes (e.g. Radio1, Radio2,
Radio3, etc.), you have the option of
browsing through its so-called "broad-
casting net- work".
NOTE
The RDS function must be activated
before you can use this feature.
To switch to the next station on the
broad-casting network,
press the G or H button (5).
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use the scan or Travelstore function.