Switching Reg On/Off; Loudness Feature - Daewoo Kalos User Manual

4–44 CLIMATE CONTROL AND AUDIO SYSTEM
Loudness
The loudness feature can be used to
boost the bass at low volume levels.
NOTE
You can adjust the loudness settings
separately for each audio source (ra-
dio, cassette and CD changer).
The loudness boost can be set in steps
ranging from 1 to 3.
"LOUDNESS OFF" means that the
loudness feature is switched off.
Press the LD button (10).
Keep pressing one of the << / >> or
B / Y buttons (8) until the required
setting appears in the display.
If you set the loudness boost to a value
of 1, 2 or 3, the LD indicator appears
in the display.
When you have finished making your
changes,
press the LD button (10).
RADIO MODE
This unit is equipped with an RDS ra-
dio receiver. Many of the receivable FM
stations transmit a signal that not only
carries the programme but also addi-
tional information such as the station
name and programme type (PTY). The
station name appears in the display as
soon as it is received.
Switching to radio mode
If you are in cassette or CD changer
mode,
press the AM/FM button (14)
or
keep pressing the SRC button (7) until
the unit switches to radio mode.
"RADIO" appears in the display.
Convenient RDS functions (AF, REG)
The convenient RDS functions AF (Al-
ternative Frequency) and REG (Re-
gional) extend your radio's range of
functions.
• AF: If this RDS function is activated,
the unit automatically tunes into the
best receivable frequency for the sta-
tion that is currently set.
• REG: At certain times, some radio
stations divide their programme into
regional programmes providing dif-
ferent regional content. You can use
the REG function to prevent the car
radio from switching to alternative
frequencies that are transmitting dif-
ferent programme content.
NOTE
REG must be separately activated/de-
activated in the menu.

Switching REG ON/OFF:

Press the MENU button (11).
Keep pressing the B or Y button (8)
until "REG" appears in the display.
"OFF" or "ON" is displayed along-
side "REG".
To switch REG on/off, press the <<
or >> button (8).
When you have finished making your
changes,
press the MENU button (11).