Storing Station Presets - Daewoo Kalos User Manual

4–46 CLIMATE CONTROL AND AUDIO SYSTEM
Setting the sensitivity of station seek
tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
Press the MENU button (11).
Keep pressing the B or Y button (8)
until "SENS HI" or "SENS LO" ap-
pears in the display.
The display shows the currently set sen-
sitivity level. "SENS HI6" means that
the tuner is highly sensitive; "SENS
LO1" means it is set to the lowest sen-
sitivity setting.
If you select "SENS LO", "lo" lights
up in the display.
Set the required sensitivity using the
<< or >> button (8).
When you have finished making your
changes,
press the MENU button (11).

Storing station presets

Storing stations manually
Select the required memory, i.e.
FM1, FM2, FMT, or one of the MW
or LW frequency ranges. To do so,
briefly press the AM/FM button (14)
repeatedly until the required fre-
quency range / memory level is dis-
played.
Tune into the required station.
Press one of the station buttons 1 - 5
(12) for longer than two seconds to
store the station to that button.
Storing Stations Automatically
(Travelstore):
You can automatically store the five sta-
tions with the strongest reception in the
region (only for FM). The stations are
stored in the FMT memory.
NOTE
Any stations that were previously
stored on this memory level are de-
leted in the process.
Keep the SCAN (TS) button (15)
pressed for longer than two seconds.
The station storing procedure begins.
"T-Store" appears in the display. After
the process is completed, the station that
is stored in FMT memory location 1
will be played.
Listening to station presets:
Select the memory level or frequency
range.
Press the station preset button 1 - 5
(12) that corresponds to the station
you want to listen to.