Activation Chart - Generac Power Systems 7 kW NG Repair Manual

Section 5.2
Setup Procedures

Activation Chart

CHOOSE LANGUAGE
Display Reads:
Language
- English
Escape
Display Reads:
Activate me (ENT) or
ESC to run in manual
Escape
Display Reads:
To Activate go to
www.activategen.com
Escape
ENTER ACTIVATION CODE (Passcode)
Display Reads:
Serial 123456789
Passcode XXXXX +/-
Escape
Display Reads:
"SELECT HOUR (0-23)"
"- 6
Escape
Page 148
Use ARROW keys to scroll to desired
language. Press ENTER to select.
+
Enter
Press ENTER to begin the activation
process.
Enter
If you do not have your activation code,
go to www.activategen.com or call
1-888-9ACTIVATE (922-8482).
If you already have your activation
code, wait 3-5 seconds for the next
display.
Enter
Use ARROW keys to scroll and find the
first number of your Activation Code.
Press ENTER to select.
Repeat this step until all digits have
been entered.
Enter
Use ESCAPE to correct previous digits.
Activation is complete when all digits
are entered above and your screen
shows this display.
+"
Follow the controller prompts to
continue setting the time function. Refer
to your Owner's Manual with questions.
Enter
Figure 162. Activation Process
TROUBLESHOOTING
If the wrong language is chosen, it can
be changed later using the "edit" menu.
If ESCAPE is pressed instead of ENTER,
your generator will only run in manual
mode (for test purposes) and NOT
ACTIVATED will be displayed. You will
need to reconnect the battery and begin
with Step 1.
TROUBLESHOOTING
What happens if "Wrong Passcode Try
Again" appears?
Reenter the activation code. If a second
attempt is unsuccessful, check the
number against the code given on
activategen.com. If it is correct and
the generator will not accept it, contact
1-888-9ACTIVATE (922-8482).