SATO TH208 Quick Manual page 4

Safety Precautions
Battery Pack
• Never try to take apart the battery pack or modify it in any way such as with a solder iron.
• Never expose the battery to direct flame, throw it into fire, or take any actions that may lead to shorting.
• When charging the battery pack, make sure to use the printer or the specified battery charger.
AC Adapter/Battery Charger (Option)
Use only the specified voltage. Using a different voltage may create the danger of fire or electric shock.
•
Use only the specified AC adapter. Using a different one may create the danger of fire or electric shock.
•
Never use the battery charger with any other battery pack except for the specified one. Doing so can rupture the battery,
•
cause leakage, fire or electric shock.
Never cut, damage or modify the power cord. Also, never place heavy objects on the power cord or heat or pull the power
•
cord. Doing so may damage the cord and create the danger or fire or electric shock.
Should the power cord ever become seriously damaged (internal wiring exposed or shorted), contact your nearest dealer or
•
service center for repair. Continued use of such a cord creates the danger of fire or electric shock.
• Never modify, excessively bend, twist, or pull the power cord. Doing so creates the danger of fire or electric shock.
Do not place in areas with high
humidity
Do not place the printer in areas
•
with high humidity or where
condensation forms.
If condensation forms,
immediately turn off the power
switch and do not use the
printer until it dries. Using the
printer while condensation is on
it could result in electric shock.
Carrying the Printer
• When moving the printer,
always unplug the power cord
from the outlet and check to
make sure all external wires are
disconnected before moving it.
Moving the printer with the
wires still connected could
damage the cords or
connecting wires and result in a
fire or electrical shock.
• Do not carry the printer with
paper loaded in it. The paper
could fall out and cause an
injury.
• When setting the printer on the
floor or a stand, make sure not
to pinch your fingers or hands
under the printer feet.
Power supply
• Do not operate the power
switch or plug in/unplug the
power cord with wet hands.
Doing so could result in electric
shock.
4
Warning
Caution
Power cord
• Keep the power cord away from
hot devices. Getting the power
cord close to hot devices could
cause the cord's covering to
melt and cause a fire or
electrical shock.
• When unplugging the power
cord from the outlet, be sure to
hold it by the plug. Pulling it by
the cord could expose or break
the core wires and cause a fire
or electric shock.
• The power cord set that comes
with the printer is especially
made for this printer. Do not
use it with any other electrical
devices.
Cover
• Be careful not to pinch your
fingers when opening or closing
the cover. Also be careful the
cover does not slip off and drop.
Print head
• The print head is hot after
printing. Be careful not to get
burned when replacing paper or
cleaning immediately after
printing.
• Touching the edge of the print
head with bare hands could
result in injury. Be careful not to
become injured when replacing
paper or cleaning.
• The customer should not
replace the print head. Doing so
could result in injury, burns, or
electric shock.
Loading paper
• When loading roll paper, be
careful not to get your fingers
pinched between the paper roll
and the supply unit.
When not using the printer
for a long time
• When not using the printer for a
long time, unplug the power
cord from the outlet to maintain
safety.
During maintenance and
cleaning
• When maintaining and cleaning
the printer, unplug the power
cord from the outlet to maintain
safety.
Lithium coin battery
• Risk of explosion if battery is
replaced by an incorrect type.
• Dispose of used batteries
according to the instructions.