Deactivation
Timer
Cooking timer
Set the timer as follows
Once the cooking time has elapsed
Changing the time
Note
Turn off the display beep
16
Press the "-" symbol. The "x" is no longer displayed. The Powerboost function
2.
is deactivated. The hotplate returns to heat setting "j".
In certain circumstances, the Powerboost function will automatically switch
d
off, to protect the hob's internal electronic components. .
Use the cooking timer to set times up to 99 minutes. The timer is independent of
any other settings.
1.
Touch the - and + symbols simultaneously and repeatedly until the Q indicator
flashes. In the timer display 00 flashes.
2.
Touch - or + to set the cooking time:
+ symbol = 10 minutes
- symbol = 5 minutes.
3.
Set the time by pressing + or -.
Press the + symbol to set a longer time.
Press the - symbol to set a shorter time.
The timer will start to count down after a few seconds.
The timer beeps. 00 flashes in the timer display. The Q indicator flashes. Touch any
key. The displays go out and the beep shuts off.
Touch the - and + symbols simultaneously and repeatedly until the Q indicator
flashes.
The timer display flashes
Use - or + to change the time.
After a power outage, this function is cancelled. The mode must be reset.
The display beeps when a key is touched. This setting can be turned off:
Turn the cooktop on at the power key.
1.
Set all elements to temperature level 3.
Using the "-" symbol, set each of the hotplates in turn to the "k" power level,
2.
from right to left (see figure).
3.
Touch the power key for at least 5 seconds. The display will beep to confirm the
change.
To turn the display beeps back on again, repeat the steps above.