Loading Paper And Envelopes Into The Rear Paper Feed Slot - Epson All in One Printer User Manual

User's Guide
H
Slide out the output tray and raise the stopper.
Note:
❏ The thickness of envelopes and their ability to fold vary widely. If the total thickness of the stack of envelopes
exceeds 10mm, press down on the envelopes to flatten them before loading. If print quality declines when a stack
of envelopes is loaded, load one envelope at a time.
❏ Do not use envelopes that are curled or folded.
❏ Flatten the envelope and the flaps before loading.
❏ Flatten the leading edge of the envelope before loading.
❏ Avoid using envelopes that are too thin, as they may curl during printing.
❏ Align the edges of the envelopes before loading.
Loading Paper and Envelopes into the Rear Paper Feed
Slot
Follow the steps below to load paper and envelopes into the rear paper feed slot:
Note:
❏ Send your job before loading paper into the rear paper feed slot.
❏ Load paper in the rear paper feed slot when the product is not operating.
Paper and Media Handling
27