Epson LX-300+ Reference Manual page 22

DLQ-3500 default-setting mode
This printer has no DIP switches; however, the following settings can be made in a special
default- setting mode.
Setting
Page length for tractor
Skip over perforation
Auto tear off
Auto line feed
Print direction
Software
0 slash
High speed draft
I/F mode
Auto I/F wait time
Parallel I/F bidirectional mode
Packet mode
Auto CR(IBM PPDS)
A.G.M.(IBM PPDS)
Character table(Standard version)
Character table(NLSP version)
International character set
for Italic table
Font *1
Manual feed wait time
Buzzer
Overlapping Forms
Note: Bold letters indicate the standard factory settings.
*1 The selected Font (OCR-B, Orator, Orator-S, Script C, Roman T, Sans Serif H) is set to 'Others'
on the control panel.
Draft, Draft Condensed, Roman, Sans Serif, Courier, Prestige and Script can be selected through
the control panel only.
3inch, 3.5inch, 4inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch, 11inch, 70/6inch, 12inch, 14inch, 17inch
Italic, PC437, PC850, PC860, PC863, PC865, PC861, BRASCII, Abicomp, Roman8, ISO Latin 1, PC858,
Italic, PC437, PC850, PC437 Greek, PC853, PC855, PC852, PC857, PC864, PC866, PC869, MAZOWIA,
Code MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC 774, Estonia, ISO 8859-2, PC 866 LAT., PC 866UKR,
PC APTEC, PC708, PC720, PCAR 864, PC860, PC865, PC861, PC863, BRASCII, Abicomp, Roman8,
ISO Latin 1, PC858, ISO8859-15, PC 771
Italic U.S.A., Italic France, Italic Germany, Italic, U.K., Italic Denmark 1, Italic Sweden, Italic Italy, Italic
OCR-B, Orator, Orator-S, Script C, Roman T, Sans serif H
0.5 seconds, 1 seconds, 1.5 seconds, 2 seconds
22
Options
OFF, ON
OFF, ON
OFF, ON
Bi-d., Uni-d., Auto
ESC/P2, IBM PPDS
OFF, ON
OFF, ON
Auto, Parallel, Option
10 seconds, 30 seconds
OFF, ON
Auto, OFF
OFF, ON
OFF, ON
ISO 8859-15
Spain 1
OFF, ON
OFF, ON