Installing Scansnap - Fujitsu ScanSnap S510M Operator's Manual

2.1

Installing ScanSnap

"Installation" is the operation to copy the supplied program file or ScanSnap Manager to the hard
disk of your computer and create the environment for using ScanSnap on the computer.
■ Before Installing ScanSnap Manager
1. Before installing ScanSnap Manager, check the following system requirements.
■ Operating system
One of the following operating systems is required:
•
Mac OS X v10.2.8, v10.3, or v10.4
Adobe Acrobat 8
ABBYY FineReader
for ScanSnap 3.0 Mac
Edition
ScanSnap Manager
(
*1 When the operating system you are using is Mac OS X v.10.2.8.
*2 There are some restrictions on the use of
■ Computer
•
Power PC
(recommended: Power PC
Intel
Processor1.83GHz or higher)
•
USB port (USB 2.0/1.1)
■ RAM
•
128MB or more (recommended: 512MB or more)
ATTENTION
6
Mac OS X
v10.1
: Supported -: Not-supported)
®
G4 processor 800MHz or higher
® TM
Core Solo or Duo Processor (recommended: Intel
•
We recommend applying the latest updates to the Mac OS for better reliability.
•
ScanSnap may not function if it is connected to a USB port for the keyboard or
the monitor.
•
If you need to use a commercially available USB hub, use a powered one that
comes with an AC adapter.
•
If you want to connect the scanner via USB 2.0, the USB port and Hub must
be USB 2.0-compliant. The scanning speed may slow down when the scanner
is connected using USB 1.1. Use the USB 2.0 port, if your computer has one.
•
If the CPU or the memory does not meet the requirements, the scanning
speed will slow down.
Mac OS X
*1
v10.2
- -
- -
-
Adobe Acrobat 8
®
G5 processor 1.6 GHz or higher)
Mac OS X Mac OS X
v10.3 v10.4
- *2
.
® TM
Core Duo