Fujitsu ScanSnap S510M Operator's Manual page 159

2. Clean the following locations with a cloth moistened with cleaner F1.
Pad ASSY
It may take long before the cleaner vaporizes if a large quantity is used. When
ATTENTION
cleaning the scanner parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.
Turn off the scanner before cleaning the following locations.
• Pad ASSY (x 1)
Remove the dirt on the rubber tabs by wiping downward. When cleaning the Pad ASSY,
take care to prevent the cloth from catching on to the metal parts.
• ADF glass surfaces (x 2 located on the ADF and the base unit)
Wipe off the dirt gently.
• Pick roller (x 1)
Wipe to clean the roller while turning it with your finger, be careful not to scratch the sur-
face. Take particular care in cleaning the Pick roller since black debris on the roller
adversely affect the pickup performance.
• Plastic rollers (x 4)
Clean them lightly while rotating the rollers with your finger. Take care not to scratch the
surface of the rollers. Take particular care in cleaning the plastic rollers since black debris
on the rollers adversely affect the pickup performance.
6.3 Cleaning the Inside of the Scanner
Eject roller
Plastic roller
Glass
ScanSnap S510M Operator's Guide
Pick roller
Feed roller
6
143