Sound Adjustments; Tuner Section - JVC GET0564-006A Instruction Manual

SETTINGS

Sound adjustments

or
Select "EQ"
* You can change "USER" settings and store as your own sound mode (see below).
Storing your own sound mode
Select "USER" for "EQ."
While "USER"
is shown on
the display...
Title assignment
You can assign titles to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title.
Select "FM" or "AM."
Show the title entry screen.
Select a character.
To erase the entire title
In step 2 above...
Menu operations
Menu items Selectable settings
DEMO • DEMO ON: The display demonstration will be activated automatically if no operation is done for
about 20 seconds.
• DEMO OFF: Cancels.
CLOCK DISP * 1 • CLOCK ON: The clock time is shown on the display at all times when the power is turned off.
• CLOCK OFF: Cancels; pressing DISP will show the clock time for about 5 seconds when the power
is turned off.
CLOCK SET : Adjust the hour, then the minute. [Initial: 1:00]
EQ : Select a preset sound mode suitable to the music genre.
USER, ROCK, CLASSIC, POPS, HIP HOP, JAZZ
DIMMER • DIMMER ON: Dims the display and button illumination.
• DIMMER OFF: Cancels.
2
SCROLL* • SCROLL ONCE: Scrolls the displayed information once.
• SCROLL AUTO: Repeats scrolling (at 5-second intervals).
• SCROLL OFF: Cancels.
Pressing DISP for more than one second can scroll the display regardless of the setting.
TAG DISPLAY • TAG ON: Shows the Tag information while playing MP3/WMA tracks.
(for KD-R304)
• TAG OFF: Cancels.
MONO * 3 • MONO ON: Activate monaural mode to improve FM reception, but stereo effect will be lost.
• MONO OFF: Restore the stereo effect.
IF BAND • AUTO: Increases the tuner selectivity to reduce interference noises between adjacent stations.
(Stereo effect may be lost.)
• WIDE: Subject to interference noises from adjacent stations, but sound quality will not be
degraded and the stereo effect will remain.
FADER* 4 R06 – F06: Adjust the front and rear speaker output balance. [Initial: 00]
BALANCE L06 – R06: Adjust the left and right speaker output balance. [Initial: 00]
LOUD • LOUD OFF: Cancels.
• LOUD ON: Boost low and high frequencies to produce a well-balanced sound at a low volume
level.
AUX ADJUST AUX ADJ 00 – AUX ADJ 05: Adjust the auxiliary input level to avoid the sudden increase of the
output level when changing the source to external component connected to the AUX input jack on
the control panel.
* 1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select "CLOCK
OFF" to save the car's battery.
* 2 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 3
Displayed only when the source is "FM."
* 4
If you are using a two-speaker system, set the fader level to "00."
Preset values
Indication (For)
USER (Flat sound) 00
ROCK (Rock or disco music) +03
CLASSIC (Classical music) +01
POPS (Light music) +04
HIP HOP (Funk or rap music) +02
JAZZ (Jazz music) +02
1
Select a tone.
Ô
BASS TREBLE
2
Adjust the Lever.
–06 to +06
This mode will be canceled if
3 1
Repeat and
no operation is done for about
other tone if necessary.
30 seconds.
Move to the next (or previous) character
position.
Repeat steps 1 and 2 until you finish entering
the title.
Finish the procedure.
Repeat step 2 if necessary.
• To return to the previous menu, press
BACK.
Initial: Underlined
Menu items Selectable settings
BEEP • BEEP ON: Activates the keypress tone.
• BEEP OFF: Deactivates the keypress tone.
AMP GAIN * 5 • HIGH POWER: VOLUME 00 – VOLUME 50
• LOW POWER: VOLUME 00 – VOLUME 30 (Select if the maximum power of each speaker is less
than 50 W to prevent damaging the speaker.)
AM * 6
• AM OFF: Disable "AM" in source selection.
00 OFF
• AM ON: Enable "AM" in source selection.
+01 ON
AUX IN * 7
• AUX OFF: Disable "AUX IN" in source selection.
• AUX ON: Enable "AUX IN" in source selection.
–02 OFF
* 5 The volume level automatically changes to "VOLUME 30" if you change to "LOW POWER" with the volume level is set
+01 OFF
higher than "VOLUME 30."
00 ON
* 6 Displayed only when any source other than "AM" is selected.
* 7 Displayed only when any source other than "AUX IN" is selected.
+03 OFF
TROUBLESHOOTING
Symptoms
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
• This unit does not work at all.
• "AUX IN" cannot be selected.
2
for the
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• "AM" cannot be selected.
• Disc cannot be played back.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be
skipped.
• Disc can be neither played back nor
ejected.
• Disc sound is sometimes interrupted.
• "NO DISC" appears on the display.
• "PLEASE" and "EJECT" appear alternately
on the display.
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required
("READING" keeps flashing on the display).
• Tracks are not played back in the order you
have intended.
• The elapsed playing time is not correct.
• The correct characters are not displayed
(e.g. album name).
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
SPECIFICATIONS
Audio amplifier section
Maximum Power Output:
Front/Rear: 50 W per channel
Continuous Power Output (RMS):
Front/Rear: 19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion.
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range: Bass: ±12 dB at 100 Hz
Treble: ±12 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
Other Terminal: AUX (auxiliary) input jack

Tuner section

Frequency Range:
FM: 87.5 MHz to 108.0 MHz
AM: 531 kHz to 1 602 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)
50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
[AM Tuner]
Sensitivity/Selectivity: 20 μV/35 dB
3 – EN
Initial: Underlined
Remedies/Causes
• Check the cords and connections.
Reset the unit.
=
Check the "SRC SELECT" "AUX IN" setting (see "Menu
operations").
Store stations manually.
Connect the antenna firmly.
=
Check the "SRC SELECT" "AM" setting (see "Menu
operations").
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which you used for
recording.
• Unlock the disc.
• Eject the disc forcibly.
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Insert a playable disc into the loading slot.
0
Press , then insert a disc correctly.
• Use a disc with MP3/WMA tracks recorded in a format compliant
with ISO 9660 Level 1, Level 2, Romeo, or Joliet.
• Add the extension code <.mp3> or <.wma> to the file names.
Skip to another track or change the disc. (Do not add the extension
code <.mp3> or <.wma> to non-MP3 or WMA tracks.)
Do not use too many hierarchical levels and folders.
Playback order is determined when the files are recorded.
This sometimes occurs during playback. This is caused by how the
tracks are recorded on the disc.
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
CD player section
Type: Compact disc player
Signal Detection System: Non-contact optical pickup
(semiconductor laser)
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Dynamic Range: 93 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
[For KD-R304]
MP3 Decoding Format: MPEG1/2 Audio Layer 3
Max. Bit Rate: 320 kbps
WMA (Windows Media® Audio) Decoding Format:
Max. Bit Rate: 192 kbps
General
Power Requirement:
Operating Voltage: DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature: 0°C to +40°C
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 160 mm
Panel Size (approx.):
188 mm × 58 mm × 6 mm
Mass (approx.):
1.3 kg (excluding accessories)
Design and specifications are subject to change without
notice.