JVC GET0266-003A Instruction Manual page 66

Indications
TEL
Telephone muting
SCROLL*
1
Scroll
WOOFER
Subwoofer cutoff
frequency
EXT IN* 2
External input
AUX ADJ
Auxiliary input level
adjustment
TAG DISP
Tag display
AMP GAIN
Amplifier gain control
* 1 Some characters or symbols will not be shown (and will be blanked) on the display
(Ex. "AБBЁ б ! " ]"AБBE Б ").
* Displayed only when one of the following sources is selected—FM, AM, CD, or AUX IN.
2
24
Selectable settings, [reference page]
MUTING 1/MUTING 2: Select either one which mutes the sounds
while using the cellular phone.
OFF : [Initial]; Cancels.
ONCE : [Initial]; Scrolls the disc information once.
AUTO : Repeats scrolling (5-second intervals in between).
OFF : Cancels.
• Pressing D DISP for more than one second can scroll the display
regardless of the setting.
LOW : Frequencies lower than 55 Hz are send to the
subwoofer.
MID : [Initial]; Frequencies lower than 85 Hz are send to
the subwoofer.
HIGH : Frequencies lower than 115 Hz are send to the
subwoofer.
CHANGER : [Initial]; To use a JVC CD changer, [15] or DAB
tuner, [28].
EXT IN : To use another external component, [27].
A.ADJ 00 – A.ADJ 05: Adjust the auxiliary input level
accordingly, to avoid the sudden increase of
the output level when changing the source from
external component connected to the AUX input
jack on the control panel.
[Initial: A.ADJ 00]
TAG ON : [Initial]; Shows the ID3 tag while playing MP3/
WMA tracks, [18].
TAG OFF : Cancels.
You can change the maximum volume level of this receiver.
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum
power of the speaker is less than 50 W to prevent
them from damaging the speaker.)
HIGH PWR : [Initial]; VOL 00 – VOL 50