Vibration Test (Unpackaged, Non-Operating); Half-Sine Shock - BenQ Q7T3-FP737S Service Manual

Q7T3-FP737S-Dual function LCD Monitor Service
B) Drop Sequence
1. Top
Surface
2. Front
3. Bottom
4. Rear
5. Right
6. Left
select at weakness side [the low left(or right) corner of the front panel]
-An edge drop with impact on the shortest edge radiating from corner 5-3-2
-An edge drop with impact on the next shortest edge radiating from corner 5-3-2
-An edge drop with impact on the longest edge radiating from corner 5-3-2
-A flat drop with impact on the rear
-A flat drop with impact on the front
-A flat drop with impact on the right
-A flat drop with impact on the left
-A flat drop with impact on the bottom
-A flat drop with impact on the top
After test, there is no electrical and mechanical damage permitted.

2.2.3 Vibration Test (Unpackaged, Non-Operating)

5~200Hz at 1.04g rms
FREQUENCY (Hz)
2.0
4.0
8.0
40.0
55.0
70.0
200.0
DURATION: 15 MINUTES PER AXIS.

2.2.4 HALF-SINE SHOCK

Test conditions:
Test unit : 2 sets
Each unit has to withstand 18 shocks.(3 shocks pre face)
No- operation
Half-sine wave
2
Manufacturing
joint
2
SPECTRUM LEVEL (g /Hz)
0.0185
0.0300
0.0300
0.0030
0.0100
0.0100
0.0010
Confidential
Engineering Specification
1
4
5
3
6
-Corner 5-3-2
6