Luxury - Mercedes-Benz C-Class Operator's Manual

Seats
98
To raise: pull the head restraint up to the
X
desired position.
To lower: press release catch : in the
X
direction of the arrow and push the head
restraint down to the desired position.
Adjusting the angle of the head restraints
Push or pull the lower edge of the head
X
restraint in the direction of the arrow.
Adjusting the head restraints
electrically
To adjust the head restraint height: slide
X
the switch for head restraint adjustment
( page 97) up or down in the direction of
Y
the arrow.
Adjusting the luxury head restraints
G
WARNING
When folding back the side cushions, never
reach between the side cushion and the
mounting post. You could otherwise be
trapped.
To adjust the side bolsters of the head
X
restraint: push or pull right and/or left-
hand side bolster : into the desired
position.
To adjust the angle of the head
X
restraint: push or pull the head restraint in
the direction of arrow ;.
Rear seat head restraints
G WARNING
For safety reasons, always drive with the rear
head restraints in the upright position when
the rear seats are occupied.
Keep the area around head restraints clear of
articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.
G
WARNING
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint in such a way that it
is as close to the head as possible and the
center of the head restraint supports the back
of the head at eye level. This will reduce the
potential for injury to the head and neck in the
event of an accident or similar situation.
With a rear seat occupied, make sure to move
the respective head restraint up from the
lowest non-use position and have the
occupant adjust the head restraint properly.
Do not drive the vehicle without the seat head
restraints installed when the rear seats are
occupied. Head restraints are intended to
help reduce injuries during an accident.
I n f o r ma t i o n P r o v i d e d b y :