Table of Contents
Advertisement
LAN Settings
Under Network Settings, select Local Networks. On both Primary & Guest LAN, DHCP Server should be dis-
abled to prevent misuse of the modem.
You may change the Guest LAN IP Address at this point. The Guest LAN IP can be used to monitor other DAS
equipment on a different network/subnet. You will also need to change the IP address of the computer that
you are using if you wish to access the modem on the Guest LAN (see section under "LAN Settings" for more
information).
For Ethernet Port Confi guration, both Ethernet 0 & Ethernet 1 should be set to Local Network (LAN).
Routing mode is NAT and Access Control for both the Primary & Guest LAN should be set to Admin Access.
-16-
Advertisement
Table of Contents
