Playing A Cd Text; Prohibiting Disc Ejection - JVC GET0143-001A Instructions Manual

When track repeat play is turned on, the RPT
indicator lights up on the display. The current
track starts playing repeatedly.

Playing a CD Text

In a CD Text, some information about the disc (its
disc title, performer, and track title) is recorded.
This CD Text information will be shown
automatically when you play a CD Text.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Disc title / performer
( lights up on the display)
Elapsed playing time and
Current track number
Current track number
Notes:
• The display shows up to 8 characters at one time
and scrolls if there are more than 8 characters.
See also "To select the scroll mode—SCROLL" on
page 33.
Some characters or symbols will not be shown (and
will be blanked) on the display.
(Ex. "ABCå!d#" ]"ABCA D ")
• When you press DISP (display) while playing a
conventional CD, "NO NAME" appears for the
disc title/performer and the track title.
22
RPT indicator
Each time you press the
button, the display changes as
follows:
Track title
Clock and

Prohibiting disc ejection

You can prohibit disc ejection and can lock a disc
in the loading slot.
While pressing CD, press and hold
for more than 2 seconds.
"NO EJECT" flashes on the display for about
5 seconds, and the disc is locked and cannot be
ejected.
To cancel the prohibition and unlock the disc
While pressing CD, press and hold
again for more than 2 seconds.
"EJECT OK" flashes on the display for about
5 seconds, and the disc is unlocked.