Panasonic KX-NCP500 User Manual page 5

c.
A KX-HGT100 user can access some PBX features using the feature numbers. Some features are only
available when the firmware of the KX-HGT100 and the MPR software file version of the PBX are upgraded
to their latest versions. Refer to "1.15.1 Operation List". For more details, consult your dealer.
d.
A KX-HGT100 user can store and dial phone numbers in his/her telephone for personal use through
KX-HGT100 programming.
e.
The tones listed in "4.3.1 What is This Tone?" are not available for SIP Extension users. Tones or the tone
types may vary depending on the type of telephone being used. For example, when you put a call on hold,
a specific tone for the SIP Extension may be heard, or no tone may be heard.
f.
Any number pressed while hearing a Busy/DND/Reorder tone, such as the feature number to activate
Automatic Callback Busy, will be ignored.
g.
The operations for SIP Extensions may differ from the steps in this manual, and may vary depending on
the type of telephone being used.
Notes for KX-NT543, KX-NT546, and KX-NT560 IP-PT Users
While using a KX-NT543, KX-NT546, or KX-NT560 IP-PT in ECO mode, IP network transmission speed is
relatively slow and the secondary Ethernet port cannot be used. To disable ECO mode, consult your dealer.
Trademarks
•
The Bluetooth
®
Panasonic Corporation is under licence.
•
All other trademarks identified herein are the property of their respective owners.
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
Feature Highlights
User Manual 5