Uniden UWS1100 Owner's Manual page 7

Mounting
Camera
screw
brace
Mounting
post
Post
lock
1.
want to attach it, and mark the location of the
screw holes.
2.
attach the base to the wall or ceiling.
3.
Tighten it a few turns, then turn it to the
direction you want.
4.
back of the camera to secure it into place.
Screw
holes
5.
wingnut to the left a few turns.
6.
then tighten the wingnut until the post is
locked into place.
Tighten the brace against
2
the camera to
secure it
in place.
3
Loosen the
wingnut to
unlock the
mounting
post.
Hold the base of the mount where you
Use the included screws and anchors to
Attach the camera to the mounting screw.
Tighten the camera brace up against the
Unlock the mounting post by turning the
Set the mounting post to the correct angle,
Attach the camera
1
to the mounting
screw and turn it
to the desired
direction.
Adjust the post to
4
the correct angle,
then tighten the
wingnut to lock the
post into place.
7