Transportation - Health O Meter 450KL User Instructions

TRANSPORTATION

Preparing a 450KL Scale for Transportation (see Figures 7-10)
This scale can be easily assembled with a wheel bracket (Part Number 55000) for storage, or
for transport from one room to another. This scale does not include 55000 Wheel Bracket, and
must be acquired separately. To prepare the scale for transport, follow these steps:
Caution: It is recommended that the assembly be performed by two persons.
1. Remove the mounting screws attaching the clamping plate to the wheel bracket.
2. Tip the scale forward until top front of the pillar is resting on the floor.
3. Position the clamping plate inside the base, and align the clamping plate, wheel bracket,
and base assembly holes.
4. Install the mounting screws through the wheel bracket, base, and clamping plate.
Tighten the mounting screws securely.
5. Carefully tip the scale to its upright position.
6. To transport the scale, tip the scale pillar back until the scale is supported by the wheel
bracket. Carefully move the scale to its new location.
Required Parts
(1) 450KL
(1) Wheel Bracket (Part Number 55000)
Note: Wheel bracket is not included.
Tools Required (not included)
Adjustable wrench or 10mm wrench
10