Model 450KL ® Thank you for your purchase of this Health o meter Professional product. Please read this manual carefully, and keep it for easy reference or training. TABLE OF CONTENTS Caution and Warning....................3 Specifications for This Scale ..................3 Certifications / Disposal / Service ................4 Assembly Instructions 450KL Scale .................5...
SPECIFICATIONS FOR THIS SCALE General The Model 450KL physician beam scale employs a proven and rugged mechanical design to measure patient weight and height. Each precision scale is designed to provide accurate, reliable, and repeatable weight measurements. In addition, each scale is designed with a rotating poise bar, and includes counterweights that enable the user to make the weighing process simple, fast, and convenient.
CUSTOMER SERVICE INFORMATION The 450KL physician beam scale is shipped disassembled in one carton. Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact Customer Service.
Page 5
450KL ASSEMBLY INSTRUCTIONS Before Assembly Each 450KL physician beam scale is shipped disassembled in one carton. Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact your shipper or a ® Health o meter Professional representative immediately. Claims must be filed with the shipper as soon as possible after receipt of the package.
Page 6
1. Carefully remove the scale platform and pillar from the carton. Place the scale platform and pillar on a flat, level, and dry surface. Using a table can be helpful for assembly of 450KL scale (see Figures 1 & 5).
TRANSPORTATION Preparing a 450KL Scale for Transportation (see Figures 7-10) This scale can be easily assembled with a wheel bracket (Part Number 55000) for storage, or for transport from one room to another. This scale does not include 55000 Wheel Bracket, and must be acquired separately.
OPERATING INSTRUCTIONS Zero Balance Adjustment The scale should be checked periodically, particularly when moved, by following the instructions below: Note: A flat head screwdriver is required. 1. Ensure that the scale is located on a hard, flat, and level surface. Step on and off scale several times in order to align all internal parts.
COUNTERWEIGHT INSTRUCTIONS Counterweight Instruction (see Figures 15 - 23) In order to increase the scale’s capacity to a maximum value of 500 lb / 200 kg, the counterweight set (55070) must be acquired. The scale can be easily assembled with a counterweight set (Part Number 55070 for whole set, 55060 for counterweight in pounds, and 55065 for counterweight in kilograms).
Page 17
COUNTERWEIGHT INSTRUCTIONS (CONT) Counterweight Instructions for Weighing a Patient 451 - 500 (lb) (see Figures 16 & 21) 1. When a patient weighs between 451 - 500 lb, place the lower poise weight at 300 lb. 2. Place the 150 lb counterweight on the 5 notch from the left, between the 150 and 200 lb value.
Page 18
COUNTERWEIGHT INSTRUCTIONS (CONT) Recording a Patient Weight in Pounds (lb) between 425 - 500 lb To read the patient’s weight that is between 425 lb - 500 lb, add the weight value indicated on the lower and upper poise bars, and add 150 lb. For example: If a patient weighs 441 lb: 1.
Page 19
COUNTERWEIGHT INSTRUCTIONS (CONT) Counterweight Set (55070) Figure 15 Notch from the left Notch from the left Figure 16...
Page 20
COUNTERWEIGHT INSTRUCTIONS (CONT) Notch from the left Figure 17 351 - 388 lb Assembly Figure 18...
HEIGHT MEASUREMENT INSTRUCTIONS Height Measurements (Refer to figures 24-30) Note: A patient needs to be a minimum of 23-5/8” (600mm) in height for the height to be accurately measured. 1. Raise the headpiece above the patient’s head. 2. Position the patient against the height rod. 3.
Page 24
HEIGHT MEASUREMENT INSTRUCTIONS Height Rod Below 46 3 ” Height Rod Extended Above 46 3 ” Indicator Inches read: 69” + Cm read: 105 cm + Cm read: 176 cm + Inches read: 41” + 3/8” = 69 3/8” 0.2 cm = 176.2 cm 0.2 cm = 105.2 cm 3/8”...
The accuracy of the 450KL scale when calibrated at the factory is within +/- 0.1kg or ¼ pound. For the most accurate weight measurement, use the scale on a hard level surface and stand in the center of the platform.
MAINTENANCE The following provide instructions for maintenance and cleaning for the 450KL. Maintenance operations other than those described in this manual should be performed by qualified service personnel. MAINTENANCE Before first use and after periods of non-use, check the scale for proper operation and function.
® ® Health o meter is a registered trademark of Sunbeam Products, Inc. used under license. Health o meter Professional products are manufactured, designed, and owned by Pelstar, LLC. We reserve the right to improve, ® enhance, or modify Health o meter Professional product features or specifications without notice.