Grip Adjustment; Shoulder Strap Attachment; Tripod Mounting - JVC Model GR-AX510 Instructions Manual

12
Recording Start/Stop button
1
3
2

Grip Adjustment

1
2
3

Shoulder Strap Attachment

1
2
1
2

Tripod Mounting

1
GETTING STARTED (cont.)
EXPAND LOOP
Separate the Velcro strip.
INSERT HAND
Pass your right hand through the loop and grasp the
grip.
ADJUST STRAP LENGTH
Adjust so your thumb and fingers can easily operate
the Recording Start/Stop button and Power Zoom
switch. Refasten the Velcro strip.
ATTACH STRAP
Following the illustration at left, thread the strap
through the top of the eyelet (1), then fold it back
and thread it through the keeper (2), and then
through the buckle (3). Repeat the procedure to
attach the other end of the strap to the other eyelet,
making sure the strap isn't twisted.
ADJUST LENGTH
Adjust as shown in the illustration at left (1), then
slide both keepers snug against the eyelets to
prevent slipping (2).
ALIGN AND TIGHTEN
Align the screw and camera direction stud on the
tripod with the camera's mounting socket and stud
hole. Then tighten the screw.