Clock (Lithium) Battery Removal/Insertion; Date/Time Settings - JVC Model GR-AX510 Instructions Manual

10
A
Date
Month/Day/Year
DATE ... Date setting is performed
DATE JAN 1.00
TIME AM12:00
Time
12-hour indication with AM or PM
TIME .... Time setting is performed

Clock (Lithium) Battery Removal/Insertion

This battery is necessary to operate the clock and to
perform date/time settings.
1
2
3
4
–/+ SET
5
NOTE:
See "SAFETY PRECAUTIONS"(
on safe handling of lithium batteries.

Date/Time Settings

1
POWER
2
3
NOTE:
The clock does not keep time while the date and time are
blinking.
GETTING STARTED (cont.)
SWITCH OFF POWER
Switch off the unit's power and remove the power
supply unit.
OPEN COVER
Open the clock battery compartment cover while
pressing the release tab.
REMOVE BATTERY (when replacing)
Insert a pointed, non-metallic object between the
battery and the compartment (
battery out.
INSERT BATTERY
Ensuring the plus (+) side is up, insert the supplied
lithium battery and push it in.
CLOSE COVER
Close the compartment cover until it clicks in place.
SELECT MODE
Set the power switch to CAMERA.
SET DATE/TIME
Press SET and the month blinks. Press + or – to set
the month. Repeat to set day, year, hour and minute.
START CLOCK
Press SET. The blinking stops. The date and time are
both displayed for confirmation, then the time
display disappears.
) and pull the
A
pg. 2) for information