Hardware Monitor Page; Change Password - ASROCK M810LMR User Manual

Hardware Monitor Page

This page sets some of the parameters for the hardware monitoring
function of this mainboard.
AMIBIOS SETUP – HARDWARE MONITOR
(C) 2000 American Megatrends, Inc. All Rights Reserved
--- Hardware Monitor ---
CPU Temperature
System Temperature
CPU Fan Speed
System Fan Speed
Vcore
Vcc25v
Vcc3
+12V
–12V
SB3V
SB5V
Voltage Battery
CPU / System These items display CPU and system temperature
measurement.
Temperature
FANs & Voltage
These items indicate cooling fan speeds in RPM
and the various system voltage measurements.
Measurements

Change Password

If you highlight this item and press Enter, a dialog box appears
which lets you enter a Supervisor password. You can enter no more
than six letters or numbers. Press Enter after you have typed in the
password. A second dialog box asks you to retype the password for
confirmation. Press Enter after you have retyped it correctly. The
password is then required to access the Setup Utility or for that and
at start-up, depending on the setting of the Password Check item
in Advanced Setup.
Change or Remove the Password
Highlight this item, press Enter and type in the current password.
At the next dialog box, type in the new password, or just press
Enter to disable password protection.
3: BIOS Setup Utility
30°C/86°F
2.000 V
2.500 V
3.300 V
12.000 V
-12.000 V
3.300 V
ESC : Quit
5.000 V
F1 : Help
3.000 V
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
↑↓←→ : Select Item
PU/PD/+/- : Modify
: Color
29