Power Management Setup Page - ASROCK M810LMR User Manual

Floppy Drive If you enable this item, your system will check all
floppy disk drives at start up. Disable this item
Seek
unless you are using an old 360KB drive.
Password Check
If you have entered a password for the system, use
this item to determine, if the password is required to
enter the Setup Utility (Setup) or required both at
start-up and to enter the Setup Utility (Always).
Boot to OS/2 >
Enable this item if you are booting the OS/2
operating system and you have more than 64MB of
64MB
system memory installed.
L1 Cache Leave this item enabled since all the processors
that can be installed on this board have internal
cache memory.
System BIOS
If you enable this item, a segment of the system
BIOS will be cached to main memory for faster
Cacheable
execution.

Power Management Setup Page

This page sets some of the parameters for system power
management operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Power Management/APM
Standby Time Out
Suspend Time Out
Display Time Out
Hard Disk Time Out
Ring On Power On
Keyboard Power On
RTC Alarm Power On
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
Power Use this item to enable or disable a power
management scheme. If you enable power
Management/APM
management, you can use the items below to set
the power management operation. Both APM and
ACPI are supported.
3: BIOS Setup Utility
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
15
12
ESC : Quit
30
F1 : Help
30
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
↑↓←→ : Select Item
PU/PD/+/- : Modify
: Color
23