Install The Mainboard - ASROCK M810LMR User Manual

Install the Mainboard

Install the mainboard in a system chassis (case). The board is an
Micro ATX size mainboard with a twin-tier of I/O ports. You can
install this mainboard in any ATX case. Ensure that your case has
an I/O cover plate that matches the ports on this mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
J5
CHSFAN
Connect the power connector from the power supply to the ATX1
connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the CHSFAN fan power connector
on the mainboard.
Connect the case switches and indicator LEDs to the J5 switch and
LED connector header. See the illustration below for a guide to the
header pin assignments.
Power LED
Pins 2-4-6
2
1
Speaker
Pins 1-3-5-7
Suspend Switch
Pins 11-12
2: Mainboard Installation
Reset Switch
Turbo LED
Pins 17-18
Pins 13-14
Power Button
Pins 21-22
22
21
HDD LED Suspend LED
Pins 15-16
Pins 19-20
ATX1
13