Pci / Plug And Play Setup Page; Load Optimal Settings - ASROCK M810LMR User Manual

PCI / Plug and Play Setup Page

This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Share Memory Size
O/S Control
Primary Graphics Adapter
Allocate IRQ for PCI VGA
Plug and Play
Enable this item if you are using an O/S that
supports Plug and Play such as Windows 95 or
Aware O/S
98.
Share Memory This item lets you allocate a portion of the main
memory for use by the onboard VGA display.
Size
O/S Control
This item lets you select Japanese operating
system or not.
Primary Graphics This item indicates if the primary graphics adapter
uses the PCI or the AGP bus. The default PCI
Adapter
setting still lets the onboard display work and
allows the use of a second display card installed in
a PCI slot.
Allocate IRQ for If this item is enabled, an IRQ will be assigned to
the PCI VGA graphics system. You set this value
PCI VGA
to No to free up an IRQ.

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of fail-safe
default values. These default values are not very demanding and
they should allow your system to function with most kinds of
hardware and memory chips.
3: BIOS Setup Utility
Yes
16MB
Normal
PCI
Yes
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
↑↓←→ : Select Item
PU/PD/+/- : Modify
: Color
25