JVC LYT0291-001B Instructions Manual page 24

24
EN
SNAPSHOT Button
Recording Start/Stop Button
Display
MANUAL
PAUSE
MANUAL
PS
DEC 25 ' 99
PM 5 : 30
Progressive mode display
Power lamp
Lock Button
Power Switch
– – –
35 min
REC
444
6w
RECORDING
Progressive Mode Recording
Recording a high-resolution still image. If an image is
recorded using the Progressive Mode, it is possible to play
back a jitter-free still image with superior quality. A high-
resolution still image can also be processed on a personal
computer or can be printed out (
1
SELECT OPERATION MODE
Set the Power Switch to "
the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully. The
power lamp lights and "PS" appears.
2
START PROGRESSIVE MODE
RECORDING
Press the Recording Start/Stop Button. The tally lamp
lights.
To End Progressive Video Recording . . .
.... press the Recording Start/Stop Button. The camcorder
enters the Record-Standby mode.
NOTES:
When an image recorded using the Progressive Mode is
played back, the image may not look natural.
When the Power Switch is set to "
Dissolve ( pg. 34) and the modes of Program AE with
special effects other than "SHUTTER", "TWILIGHT",
"SEPIA" or "MONOTONE" (
The Pro Snapshot modes other than Multi-Analyzer 4 &
9 ( pg. 26) are also possible in the Progressive Mode.
Advanced Features (cont.)
pg. 52, 53).
" while pressing down
", Picture Wipe/
pg. 37) cannot be used.