Overload Protection - Miller Trailblazer 302 Diesel Owner's Manual

8-5. Overload Protection

1
2
3
.
A complete Parts List is available at www.MillerWelds.com
!
.
1
CB4 protects the stator winding
supplying 24 volt ac output to Re-
mote receptacle RC4. If CB4
opens, 24 volt ac output to RC4
stops.
.
Press button to reset.
2
CB7 protects the engine glow plug
circuit. If CB7 opens, the glow plug
does not heat. CB7 automatically
resets when the fault is corrected.
3
CB8 protects the engine battery cir-
cuit. If CB8 opens, the engine will
not crank. CB8 automatically re-
sets when the fault is corrected.
Stop engine.
When a circuit protector opens,
it usually indicates a more seri-
ous problem exists. Contact a
Factory Authorized Service
Agent.
Supplementary Protector
CB4
Supplementary protectors
CB1 and CB3 protect the stator
winding supplying 115 volt ac
output to Remote Receptacle
RC4 (see Section 5-10).
Circuit Breaker CB7
Circuit Breaker CB8
Ref. 804 198-D
OM-217 454 Page 41