Advertisement
Quick Links
R4X and R6X
robot coupe U.S.A., Inc.
P.O. Box 16625, Jackson, MS 39236-6625
280 South Perkins St., Ridgeland, MS 39157
email: robocoup@misnet.com
website: www.robotcoupeusa.com
1-800-824-1646
OPERATION MANUAL
FOR
Series D
Series D Serial Numbers
R4X- 233xxxxx03
R6X- 237xxxxx03
MODEL
Advertisement
Related Manuals for Robot Coupe R4X
Summary of Contents for Robot Coupe R4X
- Page 1 OPERATION MANUAL MODEL R4X and R6X Series D Series D Serial Numbers R4X- 233xxxxx03 R6X- 237xxxxx03 robot coupe U.S.A., Inc. P.O. Box 16625, Jackson, MS 39236-6625 280 South Perkins St., Ridgeland, MS 39157 email: robocoup@misnet.com website: www.robotcoupeusa.com 1-800-824-1646...
- Page 2 R4X and R6X Operation Manual...
- Page 3 1 Hp which plugs into a stan- dard 120 volt/ 60 Hz, 15 amp power outlet. The full load amperage rating for the R4X is 7.5 amps, and the amperage rating for the R6X is 7.6 amps. The stan- dard machines are supplied with a continuous feed at- tachment, and two cutting plates.
- Page 4 R4X and R6X Operation Manual II. ASSEMBLY/DISASSEMBLY INSTRUCTIONS Your Robot Coupe should be placed on a sturdy work surface at a comfortable working height and have a standard 115 volt power outlet available. Always keep the machine unplugged during assembly and disas- sembly.
-
Page 5: Assembly Instructions
R4X and R6X Operation Manual ASSEMBLY INSTRUCTIONS 1 Place the motor base assembly at a comfortable 4 IF YOU ARE PREPARING TO USE A DICING height on a sturdy work surface. Remove the plastic OR FRENCH FRY KIT: discharge plate from inside the continuous feed at- tachment. - Page 6 (see draw- will yield the longest life for your machine. ing). Remove the continuous feed lead. The Robot Coupe Food Processor will slice, grate, 4 Remove cutting plate. Rotate plate slightly coun- shred and julienne. These processes will be per- terclockwise, then lift free of shaft.
- Page 7 R4X and R6X Operation Manual DO NOT remove the continuous feed lead (2) Grating Operation: Again, prepare the product as to allow insertion into the feed chute. Consider when the motor is running. Wait until the which chute will be used. As an example, placement motor has come to a full stop.
- Page 8 User applications may re- thicker slices can be obtained for use in soups and quire additional plates. The Robot Coupe processor stews. The C434SA (9/16") slicer also provides an will preform a variety of functions: slicing grating, dic- excellent cut of lettuce for use in a salad.
- Page 9 28115 cut thicker. The shaded areas indicate additional combinations that can be used. While the standard Robot Coupe comes with two specific The 5mm dicing combination is generally used for plates (C446SA and C450GPA) at time of printing, many potatoes and squash because of its small size.
- Page 10 These attachments can also be washed in a three tank system pot sink. (1) Care: While the Robot Coupe is a ruggedly con- structed machine, overall handling should be accom- NOTE: The high temperatures of dish machines plished with a sense of use rather than abuse.
-
Page 11: Troubleshooting Aids
ROBOT COUPE Wear cut-resistant gloves when removing a jam! 6. Try another outlet. Your Robot Coupe has a one year limited warranty B. Continuous feed lead will not fit flush with motor against defects in parts and workmanship. Should the unit require service, check with your distributor to base. - Page 15 Seal Assembly (Seal Support) (D) Run Cap R4X/R6X O Ring, Seal Support S17586350 RA489 S18388701 (D) Electronic Switch R4X/R6X RA490 Strain Relief (D) Motor R4X/R6X Low Profile Base S194565 RA493 RA494 Baffle RA604E No longer available RA612X Front Data Plate (R6X)
- Page 16 KEEP ALL ORIGINAL CONTAINERS AND PACKING MATERIALS FOR CARRIER INSPECTION. Robot Coupe U.S.A., Inc., Robot Coupe S.A. or any of their affiliates, distributors, officers, directors, agents, employees, or insurers will not be obligated for consequential or other damages, losses, or expenses in connection with or by reason of the use of or inability to use the machine for any purpose.