Table of Contents
Advertisement
12-10 SETUP Screen
Item
Function, Operation
H PHASE
For adjusting the horizontal phase of the unit in relation to the signal
(external sync signal) input through the SYNC IN connector on the left
side of the unit.
Delaying the horizontal phase of the unit in relation to the external sync
signal .
................... Increase the number
Speeding up the horizontal phase of the unit in relation to the external
sync signal .
................... Decrease the number
* Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by ***.
SC PHASE
For adjusting the sub-carrier (SC) of the unit in relation to the signal
(external sync signal) input through the SYNC IN connector on the left
side of the unit.
Rotating the sub-carrier clockwise in relation to the external sync signal
................... Increase the number
Rotating the sub-carrier anticlockwise in relation to the external sync signal
................... Decrease the number
* Adjustment is not possible if the external sync signal is not input. Possible
values are indicated by ***.
The phase will change when the power is turned on/off. The SC phase
must be adjusted each time the power is turned on.
CAM MIC +48V
To set whether or not 48V voltage should be applied to the MIC IN connector
on the front section.
ON ............. 48V applied.
OFF ............ 48V not applied.
PAGE BACK
The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
12. SETUP MENU
Variation Range Initial Setting
0
128
to
256
0
to
128
256
ON
ON
OFF
–
–
77
12. SETUP MENU
12-11 Resetting of Camera Menu Setting Values
Using the FILE MANAGE screen, the CAMERA MENU settings can be reset to the initial setting values. On the FILE MANAGE
screen, select the file of the CAMERA MENU to be reset, and then perform the resetting operation.
OPERATE/WARNING
LIGHT
RESET
ON
OFF
MONITOR
FILTER
SELECT
COUNTER
CTL
1 3200k
ALARM
TC
2 5600k
UB
3 5600k+ND
SHUTTER
STATUS
MONITOR
MENU
CH-1
AUDIO
CH-2
LEVEL
AUTO IRIS
FULL AUTO BLACK
LOLUX
BACK L
STRETCH
NORMAL
NORMAL
SPOT L
COMPRESS
NG
POWER
ON
OFF
2. 3. 4. 5.
1.
SHUTTER dial
STATUS button
SHUTTER
MENU
- - - CAMERA MENU -
- -
SCENE F I L E
: A
VF D I SP L AY MENU
OPERAT I ON MENU
PROCESS MENU
Cursor
F I L E MANAGE
SETUP MENU
EX I T
CAMERA MENU screen
- - - F I L E MANAGE - - -
SCENE F I L E A
STORE F I L E
: A
STORE
RESET F I L E
: OFF
Cursor
RESET
PAGE BACK
RESET OK ?
FILE MANAGE screen
78
Reset Operation
1.
Press the STATUS button for about 1 second to display the
CAMERA MENU screen.
2.
Turn the SHUTTER dial to align the cursor with the FILE
MANAGE item, and then press the SHUTTER dial in the
direction of the arrow.
• The FILE MANAGE screen appears in the viewfinder.
3.
Choose the file of the CAMERA MENU to be reset (A, B,
OFF or ALL)
• If ALL is selected, all the CAMERA MENU files will be
reset.
1 Turn the SHUTTER dial to align the cursor with the
RESET FILE item, and then press the SHUTTER dial in
the direction of the arrow.
2 Turn the SHUTTER dial to select the file to be reset,
and then press the SHUTTER dial in the direction of the
arrow.
4.
Reset the camera menu settings.
Turn the SHUTTER dial to align the cursor with the RESET
item, and then press the SHUTTER dial in the direction of
the arrow.
• The "RESET OK?" message message appears in the
lower section of the centre of the screen.
When the SHUTTER dial is pressed in the direction of the
arrow once more, the CAMERA MENU settings of the
selected file are reset to the initial settings.
5.
Close the FILE MANAGE screen
Turn the SHUTTER dial to align the cursor with PAGE BACK,
and then press the SHUTTER dial in the direction of the
arrow.
• The CAMERA MENU screen returns in the viewfinder.
Advertisement
Table of Contents
