Operation Screen; Process Screen - JVC GY-DV500 Instructions Manual

12-5 OPERATION Screen

Item Function, Operation
The SHUTTER button on the right side section is used to select STEP for
SHUTTER
fixed shutter speed or V.SCAN variable scanning rate for shooting computer
monitor screens.
STEP .............. Enables setting of different fixed shutter speeds.
[1/100, 1/250, 1/500, 1/1000, 1/2000] : U-ver.
[1/120, 1/250, 1/500, 1/1000, 1/2000] : E-ver.
VARIABLE ....... Selected when shooting computer monitor screens, etc.
[Variable range: 60.1 to 2084.6 Hz, 60.3 to 2084.6 Hz (V.
MAX mode)] : U-ver.
[Variable range: 50.1 to 2067.8 Hz, 50.3 to 2067.8 Hz (V.
MAX mode)] : E-ver.
Selects the W.BAL switch ( @ on page 13) position to which the FAW (Full-
FAW
Time Auto White Balance Adjustment) function is to be assigned.
NONE ............. FAW function is not used.
A ..................... FAW is assigned to the A position.
B ..................... FAW is assigned to the B position.
PRESET ......... FAW is assigned to the PRESET position.
GAIN L Selects the gain value in each position of the GAIN switch (9 on page
13).
GAIN M
GAIN H
SMOOTH Smoothens the transition when the GAIN switch ( 9 on page 13), or
TRANS WHT.BAL switch ( @ ) is switched over and achieves gradual change in
place of sudden change.
However, the smooth transition function does not function when switching
the GAIN switch set in ALC, FAS button and the LOLUX button.
ON .................. Activates the smooth transition function.
OFF ................. Deactivates the smooth transition function.
PAGE BACK The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
12. SETUP MENU
Variation Range Initial Setting
STEP STEP
VARIABLE
NONE NONE
A
B
PRESET
–3dB L: 0dB
0dB M: 9dB
6dB H: 18dB
9dB
12dB
18dB
ALC
ON OFF
OFF
– –
73
12. SETUP MENU

12-6 PROCESS Screen

Item Function, Operation
MASTER Adjusts the pedestal level (master black), which is the reference of black.
BLACK • To increase the pedestal level ...... Increase the number. (UP)
• To decrease the pedestal level .... Decrease the number. (DOWN)
DETAIL Adjusts the detail enhancement level.
• To sharpen details ....................... Increase the number. (UP)
• To soften details ........................... Decrease the number. (DOWN)
DTL. V/H Sets the direction, horizontal (H) or vertical (V), in which stronger detail
BAL enhancement is applied.
To strengthen the H enhancement ... .. Increase the number (UP).
To strengthen the V enhancement ... .. Decrease the number (DOWN).
Note:
While the LOLUX function is operating, the setting value is fixed at
NORMAL and "FIX" is displayed.
DTL. Varies the detail enhancement level by changing the detail enhancement
FREQUENCY frequency. Set in accordance with the subject
HIGH ............. Applies strong detail enhancement.
Used to shoot subjects with fine patterns.
MIDDLE ........ Applies medium detail enhancement.
LOW .............. Applies weak detail enhancement.
Used to shoot subjects with large patterns.
Note:
While the LOLUX function is operating, the setting value is fixed at
MIDDLE and "FIX" is displayed.
SKIN DTL Sets the Skin Detail function to ON or OFF.
DETECT ON ................ Skin Detail function activated.
OFF ............... Skin Detail function not activated.
See "Using the Skin Detail Function" on page 84.
V. Increases the vertical resolution.
RESOLUTION • NORMAL .... Vertical resolution 380 lines.
• V.MAX ......... Vertical resolution 450 lines
Note:
The sensitivity is degraded and the bright sections may be colored
depending on the subject.
ADVANCED ADVANCED PROCESS
PROCESS Displays the ADVANCED PROCESS Screen.
See "ADVANCED PROCESS Screen" on page 75.
PAGE BACK The CAMERA MENU returns when the SHUTTER dial is pressed with
the cursor at this position.
74
Variation Range Initial Setting
MAX (100) NORMAL
99 201
gradations
to
NORMAL (0)
to
-99
MIN (-100)
MAX (9) NORMAL
8 16
gradations
to
NORMAL (0)
to
-5
MIN (-6)
H-MAX (4) NORMAL
3 9
gradations
to
NORMAL (0)
to
-3
H-MIN (-4)
HIGH MIDDLE
MIDDLE
LOW
ON OFF
OFF
NORMAL NORMAL
V.MAX
– –