Whirlpool Undercounter Dishwasher Installation Instructions Manual page 10

II
Connect Water Line to Dishwasher
THROUGH WALL.
THROUGH CABINE
ACCESS-PANEL ASSEMBLY
THROUGH FLOOR
WATER INLEi VALVE
(CONNECTION IS 3/8" PIPE THREAD)
SPECIAL REMINDER:
Make sure to place the dishwasher where
its inlet valve is protected from freezing.
If valve is allowed to freeze, flooding
may occur.
Route your water pipe or tubing as illustrated, straight forward
from the back to the inlet valve. DO NOT run it across in front
of the motor.
Piping must not be kinked. It must be free of scale, chips, Iu-
bricants, etc. before you connect it to the inlet valve.
Flush line before connecting to valve.
10