Make Connections - JVC GR-SXM770A Instructions Manual

To S-Video
Open
Output
the cover.
connector
To Video Output
and Audio Output
connectors
S-Video A/V cable
cable (provided)
(provided)
To Audio, Video
and S-Video Input
connectors
VCR
TV

MAKE CONNECTIONS

1
To
J terminal
(JLIP)
2
3
Editing cable
(ø3.5 mini-
NOTE:
plug cable)
If your VCR has an S-Video input connector, connect the
(provided)
camcorder and the VCR using the provided S-Video cable.
This can improve the dubbed picture quality.
To Remote
PAUSE
To PAUSE-IN
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
VCR OTHER THAN TYPE
Connect the editing cable to the remote control's
PAUSE-IN connector.
Insert a recorded tape into the camcorder and set the
Power Switch to " ". If the DSC Lamp is lit, press
REFRESH for approx. 1 second to select "VIDEO".
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instruc-
tions).
CONTINUED ON NEXT PAGE.
55
EN
OR