Calibration Of The Auto Sensor; Cleaning And Heating Up For The First Time - Miele H 5681 BP Operating And Installation Instructions

Oven miele
Table of Contents

Advertisement

Calibration of the Auto sensor

The auto sensor will start to calibrate
after the setting up process has been
completed. A message to this effect will
appear in the display.
The process takes a few minutes.
During this time, the sensor sets itself to
the conditions in the oven.
Cleaning and heating up for
the first time
Before use, please remove
– any stickers from the oven and
from any accessories.
– any protective foil from the
oven front.
See "Cleaning and care" for more
information.
Before using the oven for the first time
– take all accessories out of the oven
and wash them.
– then heat the oven up once with
nothing in it. New ovens have a
slight smell on first use and this will
dissipate the smells before you use it
to cook food.
^ Before heating the oven up it is a
good idea to wipe the interior out with
a damp cloth. This way any dust or
bits of packaging that may have
accumulated in the oven cavity
during storage and unpacking will be
removed.
^ Touch the K sensor.
The appliance will switch on and the
main menu will appear in the display.
Before using for the first time
^ Touch the sensor next to "Fan plus".
The recommended temperature of
160 °C will appear highlighted.
^ Increase the temperature to 250 °C
(the highest temperature). To do this,
you can either use the sensor next to
or the numerical keypad.
+
^ Touch the sensor next to "OK".
^ Heat the empty oven for at least an
hour.
Please ensure the kitchen is well
ventilated during this operation.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
This procedure can be set up to switch
itself off automatically. See "Operation -
Entering duration, start time or finish".
^ Leave the appliance to cool down to
room temperature.
^ Then wipe the oven interior out with a
solution of hot water and a mild
detergent and then dry it thoroughly
with a soft clean cloth.
Leave the oven door open until the
oven interior is completely dry.
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H 5688 bp

Table of Contents