Calibration Of The Oxygen Sensor; Cleaning And Heating Up For The First Time - Miele H 4641 Operating Instructions Manual

Before using for the first time

Calibration of the oxygen sensor

Cleaning and heating up for the first time

18
i
Sensor calibrating.
Please wait.
If this message appears in the display, the built-in oxygen
sensor is calibrating itself.
The whole procedure takes approx. 5 minutes.
During this time the sensor electronically measures
conditions in the oven. This enables the sensor to be set to
the appliance's specific conditions.
This measurement is repeated at regular intervals to enable
the sensor to continually monitor conditions in the oven.
Before use, please remove
- any stickers from the floor of the oven, baking trays,
grill pan etc.
- any cork spacers at the sides above the oven cavity.
- any protective foil from the oven front.
See "Cleaning and care" for more information.
Before using the oven for the first time
– Take all accessories out of the oven and wash them.
– then heat the oven up once with nothing in it. New
ovens have a slight smell on first use and this will dissipate
the smells before you use it to cook any food.