Fitting The Flexiclip Telescopic Runners - Miele H 5681 BP Operating And Installation Instructions

Features
Fitting the FlexiClip telescopic
runners
The telescopic runners are fitted in
between the two rails that make up a
shelf level.
The telescopic runner with the Miele
logo is fitted on the right.
When fitting the telescopic runners
do not extend them.
^ Fit the telescopic runner in between
the two rails at the front (1) and then
push it into the oven compartment
(2).
^ Then secure the telescopic runner to
the bottom of the two rails as
illustrated (3).
If the telescopic runners are difficult
to pull out after fitting, you may need
to pull firmly on them once to release
them.
18
^ To remove a FlexiClip runner so that
you can clip it into another shelf
runner, for example, lift it at the front
(1) and then pull it out (2), as
illustrated.
Make sure that the oven has cooled
down before fitting the FlexiClip
runners.
Danger of burning.