Flexiclip Telescopic Runners; Fitting The Flexiclip Telescopic Runners - Miele H 5900 B Operating And Installation Instructions

Accessories

FlexiClip telescopic runners

(depending on model)
The oven can be fitted with up to three
pairs of FlexiClip telescopic runners.
The FlexiClip telescopic runners can be
clipped into any of the existing shelf
runners and pulled out of the oven to
their fullest extent.
Push the telescopic runners right in
before placing a tray or rack on
them.
To prevent the risk of a rack or tray
sliding off the runners, make sure that
they are sitting securely on their
runners in between the stoppers at
either end of each runner.
The FlexiClip runners can support a
maximum load of 15 kg.
14

Fitting the FlexiClip telescopic runners

,
Make sure that the oven has
cooled down before fitting the
FlexiClip runners.
Danger of burning.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The runner with the Miele logo is fitted
on the right.
When fitting the FlexiClip runners do
not extend them.
^ Fit the FlexiClip runner in between the
two rails at the front (1) and then push
it into the oven compartment (2).
^ Then secure the FlexiClip runner to
the bottom of the two rails as
illustrated (3).
If the FlexiClip runners are difficult to pull
out after fitting, you may need to pull
firmly on them once to release them.