Table of Contents
Advertisement
11.
Remove the three remaining Torx T15 screws that secure the system board to the chassis.
12.
Slide system board toward the front of the unit until the rear connectors are clear of their slots in
the chassis (1).
13.
Lift the rear of the system board until it clears the chassis, and then remove the system board from
the chassis (2).
To install the system board, reverse the removal procedure.
NOTE:
When replacing the system board, you must also change the chassis serial number in the
BIOS.
46
Chapter 4 Removal and replacement procedures
Advertisement
Table of Contents
Troubleshooting
