Table of Contents
Advertisement
Graphics board
Description
AMD Radeon HD 7650A 2GB MXM Graphics
CAUTION:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the drive cage
4.
Remove the two Torx T8 screws (1) that secure the graphics board to the system board, rotate the
board upward to a 45-degree angle (2), and the pull it away from the system board connector
and out of the computer (3).
NOTE:
To install the graphics board, reverse the removal procedure.
If you need to remove the heat sink from the graphics board, loosen the four captive Torx screws that
secure the heat sink from the graphics board, and then lift the heat sink from the graphics board.
42
Chapter 4 Removal and replacement procedures
Be very careful when removing or replacing the system board to prevent damaging it.
(Access panel on page
(Drive cage (fiber NIC assembly holder) on page
Graphics card appearance may vary.
(Preparation for disassembly on page
18).
Spare part number
708866-001
17).
34).
Advertisement
Table of Contents
Troubleshooting
