Pairing A Phone - Chevrolet 2011 Equinox Navigation System Navigation Manual

102 Infotainment System
Pair cell phone(s) to the vehicle.
The system may not work with
all cell phones. See Pairing a
Phone in this section for more
information.
If the cell phone has voice
dialing capability, learn to
use that feature to access the
address book or contact list.
See Voice Pass-Thru in this
section for more information.
See Storing and Deleting Phone
Numbers in this section for
more information.
WARNING
When using a cell phone, it can
be distracting to look too long
or too often at the screen of
the phone or the infotainment
(navigation) system. Taking
your eyes off the road too long
or too often could cause a crash
resulting in injury or death. Focus
your attention on driving.
Using Voice Recognition
To use voice recognition, press
the / button located on the
steering wheel.
The system responds with a tone.
After the tone say Hands Free to
use the bluetooth voice recognition
system. The system then responds
with Ready, followed by a tone.
After the tone, say a command.
For additional information say
Help while you are in a voice
recognition menu.

Pairing a Phone

1. Press / . Say Hands Free
after the tone.
2. Say Bluetooth.
3. Say Pair. The system responds
with instructions and a four digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturers
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN that was provided in Step 3.
After the PIN is successfully
entered, the system prompts you
to provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to the
vehicle, see Listing All Paired
and Connected Phones after for
more information.
6. Repeat Steps 1 through 5 to pair
additional phones.