Random Assemble Editing - JVC GR-DVX Instructions Manual

62
EN

Random Assemble Editing

Create edited videos easily using your camcorder as the source player. You can select up to 8 "cuts" for
automatic editing, in any order you like.
Using the RM-V711U remote control, you can use P.AE/Effects and make an original edited tape.
Source tape (Camcorder)
1 MAKE CONNECTIONS
Connect the Docking Station to your VCR and
make sure that the playback picture and sound
are available on the connected TV (
• Connections should be made while the power
is off. Making connections with the power on
can lead to electrical shock or malfunctions.
2 START SOURCE PLAYBACK
First turn the Power Dial to "PLAY". Press PLAY
and then press R.A. EDIT ON/OFF on the
remote control. Make sure to point the remote
control at the camcorder's remote sensor.
• The Random Assemble Editing Menu appears
on the TV screen or the LCD monitor.
3 EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press FADE/WIPE on the remote control.
• Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
• You can't use a Picture Wipe/Dissolve at the
beginning of Program 1.
VIDEO/AUDIO
cable (provided)
To AUDIO output
jacks (L/R)
Red
White
Yellow
To VIDEO output jack
S-VIDEO cable (provided)
To S-VIDEO output jack
Remote sensor
To EDIT jack
pg. 58).
To AUDIO input jacks (L/R)
Red
White
Yellow
To VIDEO input jack
To S-VIDEO
input jack
To remote pause jack
Editing cable
Core filter
(provided)
New tape (VCR)
NOTES:
When using a JVC VCR with a remote pause
terminal, connect the editing jack on the Docking
Station to the VCR's remote pause terminal using
an editing cable.
If you use a JVC VCR not equipped with a remote
pause terminal or a non-JVC VCR, connect the
Docking Station's editing jack to the remote
control's remote pause terminal using an editing
cable.
Before Random Assemble Editing, make sure the
indications don't appear on the TV monitor. If they
appear during Random Assemble Editing, they will
be recorded onto the new tape. To clear the
Playback Sound Mode Display, press DISPLAY on
the RM-V711U Remote Control. Select "DISPLAY"
and "TIME CODE" from the Playback Menu
( pg. 54) to show or hide the Date/Time and the
Time Code on the recording. To show or hide all
indications except for the Random Assemble
Editing Menu, press the IND.ON/OFF button on
the camcorder for longer than 1 second. When
Random Assemble Editing starts, its indications
disappear and are not recorded on the new tape.
EDITING
(Cont.)
VCR
(Recording deck)
RM-V711U
T W
PLAY
R.A. EDIT
ON/OFF