Troubleshooting; Installation - Panasonic KX-TD612CE Installation Manual

Troubleshooting

3.1 Troubleshooting

3.1.1 Installation

PROBLEM
Extension does not operate.
Improper reset operation.
Noise in external paging.
Sound distortion from external
music source.
Speed Dialling or One-Touch
Dialling does not function.
Your Single line rotary
telephone does not function.
You forget your own extension
number.
80
PROBABLE CAUSE
Bad printed circuit board.
Bad connection between the
system and extension.
Bad extension.
Noise on the wire between the
system and the amplifier.
Excessive input level from
external music source.
Bad programming.
The pulse dial from your
telephone is disabled by the
system.
POSSIBLE SOLUTION
Exchange printed circuit board for
another printed circuit board.
Take that extension and plug it into
the same extension port using a short
telephone cord. If the telephone does
not work, connection between the
system and the extension must be
repaired.
Take that extension and plug it into
another extension port that is
working. If the telephone does not
work, replace the phone.
Press the reset button.
Use a shielded cable as the
connection wire between the system
and amplifier. A short shielded cable
is recommended.
Decrease the volume.
Enter the ISDN port access number
(0, 81 through 83) when
programming.
Select "Enable" in programme [121]
Pulse Dial Reception Assignment.
You can confirm your own extension
number if your telephone is provided
with a display. Press [PROGRAM]
[99] [6]. To exit from the mode, press
[HOLD] [PROGRAM].
Installation Manual