Troubleshooting - Panasonic KX-TS208W Operating Instructions Manual

PQQX13324VA-04.qxd 14.7.1 13:33 ページ37

Troubleshooting

Problem
The unit does not work.
The unit does not ring.
The line indicators do not
work properly.
You cannot dial.
The other party suddenly
cannot hear your voice
during a conversation.
You cannot program items
such as the dialing mode.
You cannot store a phone
number in memory.
You cannot redial by
(REDIAL)
pressing
For assistance, please visit http://shop.panasonic.com/support
≥Check the settings (p. 9–17).
≥Remove the batteries and reinstall
them to reset the unit.
≥The RINGER selector(s) is/are set to
OFF. Set to HIGH or LOW (p. 16).
≥Check the settings (p. 9–17).
≥The batteries have become weak.
Replace them with new ones (p. 36).
≥Check that the dialing mode selection
is correct (p. 14).
≥Dial lock mode is set. To cancel the
mode, see page 32.
≥The dialed number is restricted. To
cancel, see page 34.
(MUTE)
≥
the conversation. If "
(MUTE)
press
≥Do not pause for over 60 seconds
while programming.
≥Check that the batteries are installed in
the unit and that the battery power is
not low.
≥Do not enter a phone number more
than 22 digits long.
≥When using the Dial Lock (p. 32) or
Call Restriction feature (p. 33), you
cannot store a phone number in the
EMERGENCY button.
≥If the last number dialed was more
. than 32 digits long, the number will not
be redialed correctly.
Remedy
may have been pressed during
" is displayed,
.
"
37