Grip Adjustment; Viewfinder Adjustment; Shoulder Strap Attachment; Tripod Mounting - JVC GR-DVL20 Instructions Manual

Power Zoom Lever
Recording
Start/Stop Button
Dioptre
Adjustment
Control
3
1
2
Power Switch
4

Grip Adjustment

1
Separate the Velcro strip.
2
Pass your right hand through the loop and grasp the
grip.
3
Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and the
Power Zoom Lever. Refasten the Velcro strip.

Viewfinder Adjustment

1
Set the Power Switch to "
The power lamp comes on and the camcorder is
turned on.
2
Slide the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.

Shoulder Strap Attachment

1
Following the illustration, thread the strap through the
1
eyelet , then fold it back and thread it through the
2
buckle . Repeat the procedure to attach the other
end of the strap to the other eyelet
the strap is not twisted.
2
Adjust as shown in the illustration

Tripod Mounting

1
Align the screw and camera direction stud on the
tripod with the camera's mounting socket and stud
hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilise the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
11
EN
" or " ".
3
, making sure
4
.