Step 9 - Insert The Grille - OWI ICM6-730SET Installation Manual

High output ceiling speakers

Hide thumbs Also See for ICM6-730SET:

Table of Contents

INSTALLATION AND WIRING

Step 9 – Insert the Grille

Consider which direction the logo is facing and press the grille into place until the front

of the grille is flush with the rim. Make sure grille is securely seated to prevent it from

vibrating loose and falling. The grille presents a tight fit in order to make sure that it

won't fall out, even with high vibrations that can be produced by these speakers.

Removing the Grille - If you need to remove the grille, it is easiest to do so by inserting

two pointed objects (such as bent paperclips or push pins) into two nearby holes in the

grille, then apply slow even pressure to pull down on the grille until that section of the

grille comes out approximately 6 mm (1/4 inch). Work your way around the grille,

loosening a section at a time until the grille comes out.

OWI INC. ICM6-730SET (All-N-One) CEILING SPEAKERS – INSTALLATION GUIDE

Table of Contents