Quick Operation Guide - JVC GR-AXM210 Instructions Manual

QUICK OPERATION GUIDE

SUPPLY POWER
A
BATTERY RELEASE
Using the battery pack
Hook its end to the camcorder (
battery pack in until it locks in place (
(Charging procedure,
To remove the battery pack
Slide BATTERY RELEASE and pull out the battery
pack.
PLAYBACK
2
REW (2) Button
3
PLAY/PAUSE
(4/6) Button
STOP (5) Button
1
Set the Power Switch to "PLAY".
2
Press REW (2).
— The tape will automatically stop at the
beginning of the tape.
3
Press PLAY/PAUSE (4/6).
— Playback starts and the playback picture
appears.
•To stop playback, press STOP (5).
(For more details,
•The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
Or simply play back the tape on a VHS VCR
using the Cassette Adapter (VHS Playpak).
pg. 43
Hook on.
Push in.
B
) and push the
).
pg. 8)
1
Set to "PLAY"
pg. 40.)
INSERTING A VIDEO
CASSETTE
PUSH Button
1
Open the LCD monitor to an angle of over 60
degrees.
2
Slide EJECT to open the cassette holder.
3
Insert a video cassette.
4
Press PUSH to close the cassette holder.
(For more details,
SHOOTING
3
Recording Start/Stop Button
1
Turn the LENS COVER Open/Close Ring to
open the lens cover.
2
Set the Power Switch to "AUTO" or "PRO.".
— The power lamp will light and an image
will appear.
3
Press the Recording Start/Stop Button.
— Recording starts.
•To stop recording temporarily, momentarily
press the Recording Start/Stop Button once
again.
(For more details,
•The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
EN
EJECT Switch
pg. 13)
1
LENS COVER
Open/Close Ring
2
Set to "AUTO"
or "PRO."
pgs. 16 – 19)
5