Page 1: Table Of Contents
COMPACT VHS CAMCORDER GR-SXM330 GR-SX960 GR-AXM230 GR-AX760 S-VHS is compatible with GR-SXM330/SX960 only. INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No.
Page 2: Safety Precautions
Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents on the cover.
Page 3: Important Safety Instructions
Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. JVC’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.
Page 4: Automatic Demonstration
If the Power Zoom Lever is not moved for more than 1 minute after that, the demonstration will resume. “DEMO MODE” remains “ON” even if the camcorder power is turned off. To cancel Automatic Demonstration, set the Power Switch to “...
Page 5 How To Attach The Lens Cap To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
Page 6: Getting Started
1. Perform steps 1 through 3 of “CHARGING THE BATTERY PACK”. 2. Press REFRESH on the camcorder for over 2 seconds. The REFRESH lamp on the camcorder blinks to indicate discharging has started.
Page 7: Using Ac Power
ATTENTION: Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction. Charge marker A charge marker is provided on the battery pack to help you remember whether it has been charged or not.
Page 8: Grip Adjustment
Then tighten the screw. CAUTION: When using a tripod, be sure to open and extend its legs fully to Stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a small-sized tripod. ” or “...
Page 9 “ RETURN”. Press the MENU Wheel in to close the Menu Screen. NOTE: To display the date and time in the camcorder’s display and on a connected TV, see “Date/Time Insert” ( For other notes, ”.
Page 10: Recording Format Setting
MENU Wheel Power Switch Display: when a VHS cassette is loaded. Menu Screen – S – VHS ET Setting Menu – Normal Screen GETTING STARTED Recording Format Setting (GR-SXM330/SX960 only) Set the recording format according to the format of the tape used or type of recording you wish to perform.
Page 11: Recording
— When tapes recorded in S-VHS or S-VHS ET mode are played back on a VCR equipped with the SQPB (S-VHS QUASI PLAYBACK) function, S-VHS picture quality is not available. — Tapes recorded in S-VHS ET mode cannot be played back on some VCRs, including some JVC VCRs (eg: HR-S6600U, HR-SC1000U, etc.).
Page 12: Tape Length Setting
MENU Wheel Power Switch Display REC MODE REC MODE Menu X I T Recording mode indicator Display TAPE LENGTH TAPE LENGTH Menu Tape length T 3 0 indicator GETTING STARTED Recording Mode Setting Set the tape recording mode depending on your preference. Set the Power Switch to “...
Page 13: Loading/Unloading A Cassette
Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some cassettes have removable tabs. If the tab has been removed, cover the hole with adhesive tape. The cassette holder cannot be opened while the camcorder is in the record mode.
Page 14: Basic Recording
Press the Recording Start/Stop Button. “ (Approximate) in the viewfinder while recording is in progress. To Stop Recording ..press the Recording Start/Stop Button. The camcorder re-enters the Record-Standby mode. 3MIN Shooting While Watching The LCD Monitor Make sure the LCD monitor is fully open.
Page 15 NOTES: If the Record-Standby mode continues for 5 minutes without performing Zoom or any other operations, the camcorder’s power shuts off automatically. Set the Power Switch to “OFF”, and then back to “ turn the camcorder on again. If you are recording on a cassette from the middle (such as when a tape is removed and re-inserted during recording), use the Retake function ( of it.
Page 16: Basic Features
Approximate directions. zoom ratio • When shooting scenes with low-contrast backgrounds. Switch off the Picture Stabilizer when recording with the camcorder on a tripod. The “ cannot be used. This function cannot be activated during the “Night-Alive” ( and “VIDEO ECHO” mode ( only).
Page 17: Video Light
30 cm (11-13/16") between the video light and people or objects. Do not use near flammable or explosive materials. It is recommended that you consult your nearest JVC dealer for replacing the video light. when you use the video light. ) does not blink pg. 20) is...
Page 18: Advanced Features
To prevent this, use of a tripod is recommended. RECORDING Snapshot Use your camcorder like a regular camera and take a snapshot, or several of them in succession. Set the Power Switch to “ Press SNAPSHOT.
Page 19 FADE/WIPE Button Power Switch Recording Start/Stop Button NOTE: Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade in/out or wipe in/out. Fade/Wipe Effects These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end.
Page 20: Program Ae With Special Effects
P.AE Button Power Switch NOTES: Only one mode can be engaged at a time. The screen becomes slightly dark in the High Speed Shutter mode. Use in well-lit situations. In the “High Speed Shutter” or “Sports” modes, picture color may be adversely affected if the subject is lit by alternating discharge-type light sources such as flourescent or mercury-vapor lights.
Page 21: Digital Effects
DIGIFECT Button Power Switch NOTES: Digital Effects can be changed during recording or during Record-Standby. Digital zoom ( pg. 16) cannot be used when the “VIDEO ECHO” mode is activated (GR-SXM330 only). This function cannot be activated during the Night-Alive ( pg.
Page 22: Using Menus For Detailed Adjustment
X I T – Normal Screen RECORDING Using Menus For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. Set the Power Switch to “ MENU Wheel Press the MENU Wheel in. The Menu Screen appears.
Page 23: Camera Menu
29). S.LX NORMAL Allows you to superimpose one of eight preset titles ( TITLE Makes the date/time settings appear in the camcorder or on a connected monitor DATE/TIME pg. 25). DISP. SYSTEM MENU This Menu Screen cannot be accessed while recording.
Page 24 1 minute after that, the demonstration will resume. NOTE: When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available. Automatic demonstration will not take place. pg. 10).
Page 25: Instant Titles
Date/Time Insert Allows you to display the date and time in the camcorder or on a connected color monitor, as well as to record them manually or automatically. You should have already performed the Date/ Time Setting procedure ( pg. 9).
Page 26 I NT . T I ME NOTES (for Animation and Time-Lapse): For best results, make sure the camcorder is secured when shooting in Animation or Time-Lapse mode. Fade- or wipe-in/out cannot be performed during Animation or Time-Lapse shooting. Before performing other operations following Animation or Time-Lapse recording, make sure the Animation or Time-Lapse mode is deactivated.
Page 27: Exposure Control
Power Switch Manual Exposure Screen Exposure control level counter To brighten the image – – To darken the image Exposure Control This feature automatically adjusts the iris for the best available picture quality, but you can override it and make the adjustment manually.
Page 28: Auto Focus
When the focus level cannot be adjusted any farther or closer, “ ” or “ RECORDING Focusing AUTO FOCUS The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): •...
Page 29: White Balance Adjustment
If the white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional color/tint reproduction. Set the Power Switch to “...
Page 30: Playback
•Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. NOTES: The camcorder shuts off automatically after about 5 minutes in Stop mode. To turn on again, set the Power BRIGHT* Wheel Switch to “OFF”, then to “...
Page 31: Features
” again. “AT” blinks. When Auto Tracking finishes, the indication disappears. When noise bars appear during playback, the camcorder enters the Auto Tracking mode and “AT” is displayed. Manual Tracking may not work with tapes recorded on other VCRs or camcorders.
Page 32: Connections And Tape Dubbing
These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. A. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input connectors (GR-SXM330/SX960 only) Use optional S-Video and Audio cables. * When connecting the cables, open this cover.
Page 33: Basic Connections
Basic Connections Make sure all units are turned off. Connect the camcorder to a TV or VCR as shown in the illustration ( If using a VCR . . . go to step 3. If not . . . go to step 4.
Page 34: Using The Cassette Adapter
PLAYBACK Cassette Adapter (VHS Playpak) Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a VHS VCR. It is fully compatible with any S-VHS/VHS video cassette recorder. The cassette adapter is battery powered and automatically performs tape loading and unloading.
Page 35: Using The Remote Control Unit (Gr-Sxm330 Only)
USING THE REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. Buttons With the camcorder’s Power Switch set to “...
Page 36: Installing The Batteries
USING THE REMOTE CONTROL UNIT Remote sensor Installing The Batteries The remote control uses two ”AAA (R03)” size batteries. See “General Battery Precautions” pg. 48). Open the battery compartment cover as illustrated. Insert two ”AAA (R03)” size batteries in the correct direction.
Page 37: Playback Zoom
2) Press the ZOOM Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder’s remote sensor. Pressing T zooms in. To End Zoom ..press and hold W until magnification returns to normal.
Page 38: Insert Editing
INSERT, press and release PAUSE on the Remote Control. The Insert Editing indicator appears and the Insert Editing mode is engaged. When the scene the camcorder is aimed at appears on the screen, go to the next step. To begin Insert Editing, press START/STOP. When the counter reaches “0:00:00”, editing stops automati-...
Page 39: Audio Dubbing
A. DUB, press and release PAUSE on the Remote Control. The Audio Dub-Standby mode is engaged. To begin Audio Dubbing, press PLAY. When the counter reaches “0:00:00”, Audio Dubbing stops automatically and the camcorder enters the Audio Dub-Standby mode. To end Audio Dubbing, press STOP. NOTES: Do not press FF or REW during Audio Dub-Standby, or the edit points will not be accurate.
Page 40: Troubleshooting
If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.);...
Page 41 This is normal while recording in the EP mode. Some noise may be present while recording in the SP mode ( If you remove the power source from the camcorder while the power is on, all settings and selections are erased. Make sure to turn the camcorder’s power off before disconnecting...
Page 42: Details
•Detach the battery from the camcorder. The date/time cannot be stored in memory if the built-in clock battery runs out. Consult an authorized JVC dealer for replacement, or set the date/time as necessary before you start shooting. When the Power Switch is set to “...
Page 43: Index
Charge Marker ... pg. 7 Charging The Battery Pack ... pg. 6 Classic Film Effect ... pg. 21 Clean The Camcorder ... pg. 50 Connection To A VCR/TV ... pg. 32 Contents ... cover page Counter Memory ... pg. 31 Darken The Image ...
Page 44: Controls, Connectors And Indicators
INDEX Controls, Connectors And Indicators 6 7 8 9 &...
Page 45: Other Parts
Controls Video Light Switch [LIGHT OFF/AUTO/ON] (GR-SXM330/SX960/AXM230 only) ... Stop Button [STOP] ... • Retake Rewind Button [RETAKE R] ... • Quick Review Button [ • Rewind Button [R] ... Play/Pause Button ... • Retake Forward Button [RETAKE F] ... •...
Page 46: Indications
Indications During Recording Tape Remaining Time ... Blinks when a tape is about to reach its end. Recording Mode Indicator (SP/EP) ... Digital Effect Indicator ... Displayed at for approx. 2 seconds when the Digital Effect is switched from one mode to another by pressing DIGIFECT, then only the indicator remains at •...
Page 47: Indications During Playback
(battery, UNIT IN etc.) and wait a few minutes for them to clear. When it does, you can resume using the SAFEGUARD MODE camcorder. If the indication remains, consult your nearest JVC dealer. REMOVE AND REATTACH BATTERY •...
Page 48: Cautions
(11-13/16" ft.) between the video light and people or object. • Do not use near flammable or explosive materials. • It is recommended that you consult your nearest JVC dealer for replacing the video light. General Battery Precautions If the remote control or cassette adapter is not function- ing even if it is being operated correctly, the batteries are exhausted.
Page 49: Lcd Monitor
Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the camcorder itself. Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.
Page 50 Close and lock the cassette holder by pressing the Close button. Close and lock the LCD monitor. Slide BATTERY RELEASE to remove the battery pack. Attach the provided lens cap to the camcorder’s lens. 2. Cleaning The Camcorder CLEAN EXTERIOR Wipe gently with a soft cloth.
Page 51: Specifications
• Compact S-VHS ( • Compact VHS ( • Active Carrying Bag CB-V7U Some accessories are not available in some areas. Please consult your nearest JVC dealer for details on accessories and their availability. : Electronic viewfinder with 0.55" color LCD (GR-SX960 only) Electronic viewfinder with 0.5"...
Page 52: Español
Batería Conmutador de alimentación Adaptador de CA A la toma de corriente alterna Batería BN-V11U aprox. 1 h 30 min BN-V12U (opcional) aprox. 1 h 30 min BN-V20U (opcional) aprox. 2 h 20 min BN-V400U (opcional) aprox. 4 h 30 min ATENCION: Antes de desmontar la fuente de alimentación, asegúrese que la alimentación de la...
Page 53 GUIA PARA OPERACION RAPIDA Si la unidad comienza a funcionar mal, deje de usarla inmediatamente y consulte a su concesionario local de JVC. ALIMENTACION Utilización de la batería Enganche el lado extremo de la batería en la cámara de video y empuje la batería hasta que...
Page 54: For Servicing (Only In U.s.a.)
JVC SERVICE & ENGINEERING COMPANY OF AMERICA Pack your JVC unit in the original carton or one of equivalent size and strength. Enclose, with the unit, a letter stating the problem or symptom that exists and also a copy of the receipt or bill of sale you received when you purchased your JVC unit.
Page 55: Warranty (Only In U.s.a.)
WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers.

This manual is also suitable for:

Gr-axm230 Gr-sx960 Gr-sxm330 Gr-ax760ea Gr-ax760ee Gr-ax760ek ... Show all

JVC GR-AX760 Instructions Manual

Quick Links

Related Manuals for JVC GR-AX760

Summary of Contents for JVC GR-AX760

This manual is also suitable for:

Table of Contents